Cases-Cases Standard Rackmount Cases are rotationally molded polyethylene cases for shipment and operation of sensitive 19" electronics. The rackmount cases feature a lightweight and strong aluminum rack suspended on elastomeric shock mounts to mitigate shock and vibration. The shock isolated chassis is mounted inside a waterproof, airtight shell. Front and rear removable covers allow for easy access and additional storage space. Cases-Cases can also provide double-entry rackmount cases specifically for Compaq, Dell or NEC rackmount servers or rackmount cases with 23" telco mounting. Cases-Cases offers rackmount cases manufactured by Hardigg Industries, the industry standard.

• Rugged one-piece molded seamless covers and shells.
  
  
• Gasketted molded-in air, dust and watertight seal, keeps out humidity, sand and chemicals.
  
  
• Rotationally molded construction provides added protection in corners, on the edges and along the parting line where the case needs it most. Resistant to impact damage and abrasion.
  
  
• Engineered shock mounts, tuned to payload. 2" of sway space.
  
  
• Front and rear equipment mounting on 10-32 tapped rails; M6 also available.
  
  
• Front and rear removable covers, 2.5" and 5" depth. Covers can be used for storage.
  
  
• Recessed handles, latches and hardware protected from damage.
  
  
• Positive locking system for vertical stacking of cases.
  
  
• Full complement of options and special configurations available.
  
  
  

  
  
  
  
  

Hardigg Pro Rack cases are rotationally molded polyethylene 19" rack cases. The Pro Rack case offered outstanding durability and protection with a minimum of wasted space. The case has a removable front and rear covers. 19" rack mounting, 3 heights, 18" deep case. Rugged one piece molded seamless covers and shell. Pro Rack cases stack and interlock. Mixed Pro rack cases can be stacked. Gasketted molded-in air dust and moisture seal. Front and optional rear equipment mounting rails. Recessed Mil-Spec handles, latches and coupling hardware ATA 300 Category 1 approved. In stock for immediate delivery in gray, 13 other colors available

19" rack mount 21U case configured with 2U keyboard drawer and 8 removable pneumatic casters. Application: Portable wireless Cell site.	19" rack mount case with 11U panel space configured with 8" removable pneumatic casters and retractable handle mounted on case bottom. Application: Field test equipment.
Rackmount, double-entry case with foamed interior for monitor, UPS, speakers, cables and keyboard. Self contained table and seat kits mount to and store in 5" lids. Application: Military mission planning system.	7U rack mount case RMC7-25-5 configured with edge casters on rear covers, 2 additional carry handles on front covers. This configuration allows for easy movement over smooth surfaces. Adding edge casters is a cost effective solution to the mobility problems of rackmount cases. Case shown with ATA label set and locking cable hasps.
Case set consisting of one RMC21-27-5 and one RMC14-27-5, two 1U and one 4U cases. The 19" rack-mount cases include removable casters, front mounted keyboard tray and coupling catches The cases include modified racks to accept Compaq M-6 locking screws. Compaq UPS's, servers, storage arrays, and TFT monitors install with Cases-Cases Compaq mounting brackets.	RMC14-27-5 rackmount case outfit with a custom fabricated multi cavity storage enclosure. The enclosure is manufactured from extruded plastic and includes foam lined cavities for the storage of military security equipment. The case is part of a multi case set deployed as part of the United States anti terrorist efforts. Photo courtesy of www.flir.com.
6U Prorack case configured with 19” rack mounting rails front and rear, and hinged front lid. Application: portable test equipment for electric utility.